Users Manual Part 5
Table Of Contents
- Wheels and tyres
- Notes on noise or unusual handling characteristics
- Notes on regularly inspecting wheels and tyres
- Notes on snow chains
- Activating or deactivating snow chain mode
- Tyre pressure
- Wheel change
- Notes on selecting, fitting and replacing tyres
- Notes on interchanging wheels
- Notes on storing wheels
- Overview of the tyre-change tool kit
- Preparing the vehicle for a wheel change
- Removing and fitting hub caps
- Raising the vehicle when changing a wheel
- Removing a wheel
- Fitting a new wheel
- Lowering the vehicle after a wheel change
- Emergency spare wheel
- Technical data
- Display messages and warning/indicator lamps
- Index
Display messages
Possible causes/consequences and M Solutions
_
ð
Ä
à
á
currently unavailable Cam-
era dirty
* The camera view is restricted. Possible causes:
R
Dirt on the windscreen in the camera's field of vision
R
Heavy rain, snow or fog
R
Mist on the windscreen in front of the camera
%
Mist detected on the windscreen will be automatically removed using a built-in heater within approximately 12
minutes.
Driving systems and driving safety systems may be malfunctioning or temporarily unavailable.
Once the cause of the problem is no longer present, the driving systems and driving safety systems will be available
again.
If the display message does not disappear:
#
Stop the vehicle in accordance with the traffic conditions.
#
Clean the windscreen if necessary.
ë
Off
* The HOLD function is deactivated because the vehicle is slipping or a condition for activation is not fulfilled.
#
Reactivate the HOLD function later or check the activation conditions for the HOLD function (/ page 232).
614
Display messages and warning/indicator lamps