Users Manual Part 5
Table Of Contents
- Wheels and tyres
- Notes on noise or unusual handling characteristics
- Notes on regularly inspecting wheels and tyres
- Notes on snow chains
- Activating or deactivating snow chain mode
- Tyre pressure
- Wheel change
- Notes on selecting, fitting and replacing tyres
- Notes on interchanging wheels
- Notes on storing wheels
- Overview of the tyre-change tool kit
- Preparing the vehicle for a wheel change
- Removing and fitting hub caps
- Raising the vehicle when changing a wheel
- Removing a wheel
- Fitting a new wheel
- Lowering the vehicle after a wheel change
- Emergency spare wheel
- Technical data
- Display messages and warning/indicator lamps
- Index
Display messages
Possible causes/consequences and M Solutions
#
If the display message does not disappear, stop the vehicle in accordance with the traffic conditions and restart
the engine.
Blind Spot Assist inopera-
tive
* Blind Spot Assist is malfunctioning.
#
Consult a qualified specialist workshop.
Blind Spot Assist not availa-
ble when towing a trailer
See Owner's Manual
* When you establish the electrical connection to the trailer, Blind Spot Assist is unavailable.
#
Press the left-hand Touch Control and acknowledge the display message.
Active Blind Spot Assist
currently unavailable See
Owner's Manual
* Active Blind Spot Assist is temporarily unavailable.
The system limits have been reached (/ page 260).
#
Drive on.
Once the cause of the problem is no longer present, the system will be available again.
or
#
If the display message does not disappear, stop the vehicle in accordance with the traffic conditions and restart
the engine.
Active Blind Spot Assist
inoperative
* Active Blind Spot Assist is malfunctioning.
#
Consult a qualified specialist workshop.
Display messages and warning/indicator lamps
611