Users Manual Part 5
Table Of Contents
- Wheels and tyres
- Notes on noise or unusual handling characteristics
- Notes on regularly inspecting wheels and tyres
- Notes on snow chains
- Activating or deactivating snow chain mode
- Tyre pressure
- Wheel change
- Notes on selecting, fitting and replacing tyres
- Notes on interchanging wheels
- Notes on storing wheels
- Overview of the tyre-change tool kit
- Preparing the vehicle for a wheel change
- Removing and fitting hub caps
- Raising the vehicle when changing a wheel
- Removing a wheel
- Fitting a new wheel
- Lowering the vehicle after a wheel change
- Emergency spare wheel
- Technical data
- Display messages and warning/indicator lamps
- Index
Display messages
Possible causes/consequences and M Solutions
P
ATTENTION ASSIST Micro-
sleep Take a break!
* ATTENTION ASSIST has detected indicators of microsleep (/ page 253).
#
It is recommended that you take a break immediately.
#
Press the left-hand Touch Control and acknowledge the display message.
Driver camera view cur-
rently restricted See Own-
er's Manual
* The view of the driver camera is reduced. Possible causes:
R
Objects or stickers project into the driver camera’s field of vision
R
The driver camera is dirty
#
Keep the driver camera’s field of vision free.
#
Clean the driver camera if necessary.
Change steering wheel/
seat position until 6 dots
are visible on the upper
edge of the screen
* The driver camera cannot capture your line of sight.
#
Change the steering wheel and seat position until six dots are visible on the top edge of the screen.
Driver camera inoperative
See Owner's Manual
* The driver camera is malfunctioning.
#
Consult a qualified specialist workshop.
Display messages and warning/indicator lamps
603