Users Manual Part 5
Table Of Contents
- Wheels and tyres
- Notes on noise or unusual handling characteristics
- Notes on regularly inspecting wheels and tyres
- Notes on snow chains
- Activating or deactivating snow chain mode
- Tyre pressure
- Wheel change
- Notes on selecting, fitting and replacing tyres
- Notes on interchanging wheels
- Notes on storing wheels
- Overview of the tyre-change tool kit
- Preparing the vehicle for a wheel change
- Removing and fitting hub caps
- Raising the vehicle when changing a wheel
- Removing a wheel
- Fitting a new wheel
- Lowering the vehicle after a wheel change
- Emergency spare wheel
- Technical data
- Display messages and warning/indicator lamps
- Index
Display messages
Possible causes/consequences and M Solutions
#
Apply the electric parking brake manually.
If it is not possible to apply the electric parking brake:
#
Consult a qualified specialist workshop.
#
Where necessary, also secure the parked vehicle against rolling away.
To release:
#
If the conditions for automatic release are fulfilled and the electric parking brake is not released automatically,
release the electric parking brake manually (/ page 201).
If it is still not possible to release the electric parking brake:
#
Do not continue driving. Consult a qualified specialist workshop.
!
Release parking brake
*
The red ! indicator lamp is flashing.
The electric parking brake is applied while you are driving:
R
A condition for automatic release of the electric parking brake has not been fulfilled (/ page 201).
R
You are performing emergency braking using the electric parking brake (/ page 201).
#
Check the conditions for automatic release of the electric parking brake.
#
Release the electric parking brake manually.
600
Display messages and warning/indicator lamps