Users Manual Part 5
Table Of Contents
- Wheels and tyres
- Notes on noise or unusual handling characteristics
- Notes on regularly inspecting wheels and tyres
- Notes on snow chains
- Activating or deactivating snow chain mode
- Tyre pressure
- Wheel change
- Notes on selecting, fitting and replacing tyres
- Notes on interchanging wheels
- Notes on storing wheels
- Overview of the tyre-change tool kit
- Preparing the vehicle for a wheel change
- Removing and fitting hub caps
- Raising the vehicle when changing a wheel
- Removing a wheel
- Fitting a new wheel
- Lowering the vehicle after a wheel change
- Emergency spare wheel
- Technical data
- Display messages and warning/indicator lamps
- Index
Transmission
Display messages
Possible causes/consequences and M Solutions
Only select P when vehicle
is stationary
*
Park position j can be engaged only when the vehicle is stationary.
#
To stop, depress the brake pedal.
#
Shift the transmission to park position j while the vehicle is stationary.
Apply brake to deselect P
position
*
You have attempted to shift the transmission out of park position j and into another transmission position.
#
Depress the brake pedal.
#
Select transmission position h, k or neutral i.
Apply brake and start
engine to shift out of P or N
*
You have attempted to shift the transmission out of park position j or neutral i and into another transmission
position.
#
Depress the brake pedal.
#
Change the transmission position.
#
Start the engine.
Apply brake to select D or R
*
You have attempted to select transmission position h or k.
#
Depress the brake pedal.
#
Select transmission position h or k.
Apply brake to select R
*
You have attempted to select transmission position k.
#
Depress the brake pedal.
#
Select transmission position k.
594
Display messages and warning/indicator lamps