Users Manual Part 5
Table Of Contents
- Wheels and tyres
- Notes on noise or unusual handling characteristics
- Notes on regularly inspecting wheels and tyres
- Notes on snow chains
- Activating or deactivating snow chain mode
- Tyre pressure
- Wheel change
- Notes on selecting, fitting and replacing tyres
- Notes on interchanging wheels
- Notes on storing wheels
- Overview of the tyre-change tool kit
- Preparing the vehicle for a wheel change
- Removing and fitting hub caps
- Raising the vehicle when changing a wheel
- Removing a wheel
- Fitting a new wheel
- Lowering the vehicle after a wheel change
- Emergency spare wheel
- Technical data
- Display messages and warning/indicator lamps
- Index
Display messages
Possible causes/consequences and M Solutions
#
If the ball neck is retracted: initiate a new swivel movement and, at the same time, pull and hold the button
on the boot lid until the ball neck engages vertically in the locked position and then engages beneath the
bumper (/ page 266).
#
If the ball neck is extended: pull and hold the button on the boot lid until the ball neck engages beneath the
bumper.
If the display message does not disappear, the trailer hitch is malfunctioning and the ball neck is not locked.
#
Do not couple up the trailer. Drive on without the trailer. Note the reduced ground clearance due to the
unlocked ball neck.
#
Consult a qualified specialist workshop.
Ù
Steering malfunction Drive
carefully Visit workshop
* An electric power steering malfunction has occurred. Steering characteristics may be restricted as a result.
#
Drive on carefully.
#
Consult a qualified specialist workshop.
586
Display messages and warning/indicator lamps