Users Manual Part 5
Table Of Contents
- Wheels and tyres
- Notes on noise or unusual handling characteristics
- Notes on regularly inspecting wheels and tyres
- Notes on snow chains
- Activating or deactivating snow chain mode
- Tyre pressure
- Wheel change
- Notes on selecting, fitting and replacing tyres
- Notes on interchanging wheels
- Notes on storing wheels
- Overview of the tyre-change tool kit
- Preparing the vehicle for a wheel change
- Removing and fitting hub caps
- Raising the vehicle when changing a wheel
- Removing a wheel
- Fitting a new wheel
- Lowering the vehicle after a wheel change
- Emergency spare wheel
- Technical data
- Display messages and warning/indicator lamps
- Index
Display messages
Possible causes/consequences and M Solutions
Place the key in the
marked space See Owner's
Manual
* Key detection is malfunctioning.
#
Change the location of the key in the vehicle.
#
Place the key in the slot for starting the engine with the key (/ page 175).
Lights
Display messages
Possible causes/consequences and M Solutions
:
Left dipped beam (example)
* The corresponding light source is defective.
#
Drive on carefully.
#
Consult a qualified specialist workshop immediately.
%
LED light sources: the display message for the corresponding light appears only when all the light-emitting
diodes in the light are faulty.
:
Malfunction See Owner's
Manual
* The exterior lighting is malfunctioning.
#
Consult a qualified specialist workshop.
* Vehicles with a trailer hitch: a fuse may have blown.
#
Stop the vehicle in accordance with the traffic conditions.
#
Check the fuses and replace them if necessary (/ page 486).
580
Display messages and warning/indicator lamps