Users Manual Part 5

Display messages
Introduction
Information about display messages
Display messages appear on the driver display.
Display messages with graphic symbols are sim‐
plified in the Owner's Manual and may differ
from the symbols on the driver display. The
driver display shows high-priority display mes‐
sages in red. Certain display messages are
accompanied by a warning tone.
Please act in accordance with the display mes‐
sages and follow the additional notes in the
Owner's Manual.
For some display messages, a symbol will also
be shown:
R
Õ Further information
R
¨ Hide display message
You can select the desired symbol by swiping
left or right on the left-hand Touch Control.
Press the Õ symbol to show further information
on the driver display. Press the ¨ symbol to
hide the display message.
You can hide low-priority display messages by
pressing the G button or the left-hand Touch
Control. The display messages will then be saved
in the message memory.
Rectify the cause of a display message as
quickly as possible.
High-priority display messages cannot be hid‐
den. The driver display will show these display
messages continuously until the cause of the
display message has been rectified.
Calling up saved display messages
On-board computer:
4
Service
5
Message memory: XX
If there are no display messages, Keine Meldun-
gen vorhanden will appear on the driver display.
#
Scroll through the display messages by swip‐
ing upwards or downwards on the left-hand
Touch Control.
#
To exit the message memory: press the
G button.
574
Display messages and warning/indicator lamps