Users Manual Part 4

R
NFC is activated on the mobile phone (see
the manufacturer's operating instructions)
R
The mobile phone's screen is switched on
and unlocked (see the manufacturer's oper‐
ating instructions)
#
To connect a mobile phone: place the NFC
area of the mobile phone (see manufactur‐
er's operating instructions) on NFC touch‐
point 1.
#
Follow the additional prompts on the central
display to connect the mobile phone. Con‐
nect the mobile phone in single telephone
mode (/ page 373). Connect the mobile
phone in two phone mode (/ page 374).
#
To replace a mobile phone: hold the NFC
area of the mobile phone (see manufactur‐
er's operating instructions) on mat 1 or
place the mobile phone on it.
#
Follow the additional prompts on the central
display to replace the mobile phone in one or
two phone mode (/ page 374).
#
If required, confirm the prompts on your
mobile phone (see the manufacturer's oper‐
ating instructions).
%
If your mobile phone supports wireless
charging , it can be charged automatically on
the mat (/ page 140).
Further information can be found at: https://
www.mercedes-benz-mobile.com/
Setting the reception and transmission vol‐
ume
Requirements:
R
A mobile phone is connected (/ page 373).
Multimedia system:
4
©
5
Phone
5
Z
5
<device name>
This function ensures optimal language quality.
%
Please note that the respective mobile
phone must be selected for adjustment of
the reception and transmission volume.
#
Select Volume.
#
Set the reception and transmission volume
using Reception volume and Transmission
volume.
Further information on the recommended recep‐
tion and transmission volume: https://
www.mercedes-benz-mobile.com/
376
MBUX multimedia system