Users Manual Part 4

Configuring light mode
The following options are available:
R
Work light: the grab handle lighting and rear
interior lamp on the respective side of the
vehicle will go on.
R
Reading light: the grab handle lighting will go
on. The size and position of the light cone
can be adjusted individually.
R
Two zone light: the grab handle lighting is
shared between two zones. Spot and back‐
ground lighting can be adjusted.
R
Interior light: the grab handle lighting and
rear interior lamps on both sides of the vehi‐
cle will go on.
R
Lounge light: the grab handle lighting on both
sides of the vehicle will go on.
#
Select the pen symbol.
#
For all lighting modes: set the colour tem‐
perature and the brightness.
#
For the reading light: also set the size of
the light cone and move the light cone.
#
For two-zone lighting: also select the Light
cone or Background options.
#
For the Light cone option, also set the size of
the light cone and move the light cone.
#
For interior lighting and lounge light: also
activate the Biodynamic light option.
The biodynamic light controls the colour tem‐
perature. The colour temperature will be
adjusted automatically over the course of the
day.
Saving a lighting mode as a favourite
#
Select Store on rear favourites button.
For the Interior light and Lounge light light
modes, the prompt also appears asking
whether the left or right rear seat should be
selected.
Resetting lighting mode settings
#
Select Reset.
%
Brightness and colour temperature of the
grab handle lighting and rear lighting can be
adjusted individually via the MBUX rear tab‐
let and the app.
If the vehicle is fitted with the MBUX Interior
Assistant, adaptive rear interior lighting can
be controlled with gestures. With a gesture
towards an empty neighbouring seat, for
example, the grab handle lighting on the cor‐
responding side of the vehicle will go on.
Selecting system settings in the rear com‐
partment
Rear Seat Entertainment System:
4
©
5
Settings
5
System
Adjusting the brightness
#
Select Display brightness.
#
Adjust the brightness.
Connecting a device in the device manager
#
Select Device manager.
#
Select a device that is to be connected.
Headphones and headsets are connected
with the rear display.
Mobile phones and other devices are con‐
nected with the multimedia system.
MBUX multimedia system
449