Users Manual Part 4

R
_ Numerical keypad (show to send DTMF
tones)
R
W Add call
R
Hands-free mode (The call can be transferred
to the front or rear compartment, for exam‐
ple)
R
Private mode (The call can be transferred to
the telephone or headphones, for example)
#
Select a function.
%
Please observe that the functions and sym‐
bols can vary depending on the vehicle
equipment.
Conducting calls with several participants
Requirements:
R
There is an active call (/ page 381).
R
Another call is being made.
Switching between calls
#
Select the contact.
The selected call is active. The other call is
on hold.
Activating a call on hold
#
Select the contact of the call on hold.
Conducting a conference call
#
Select i Create conf. call.
The new participant is included in the confer‐
ence call.
Ending an active call
#
Select k End call.
%
On some mobile phones, the call on hold is
activated as soon as the active call is ended.
Accepting/rejecting a waiting call
Requirements:
R
There is an active call (/ page 381).
If you receive a call while already in a call, a
message is displayed.
Depending on the mobile phone and mobile net‐
work operator you will hear a call-waiting sound.
Alternatively, in two phone mode you will hear an
acoustic signal when the call goes through to the
other (not yet active) mobile phone.
#
Select R Accept.
The incoming call is active.
If only one mobile phone is connected with
the multimedia system, the previous call will
be put on hold.
If during a call you accept a call with the
other mobile phone when in two phone mode
then the existing call is ended.
#
Answer with message
or
#
Select k Reject.
%
This function and behaviour depends on your
mobile phone network provider and the
mobile phone (see the manufacturer's oper‐
ating instructions).
Contacts
Information about the contacts menu
The contacts menu contains all contacts from
existing data sources, e.g. mobile phone or data
storage medium.
382
MBUX multimedia system