Users Manual Part 4

Table Of Contents
Setting up car telephony via SIM card
#
Open SIM card holder loading drawer 1 in
the glove compartment .
#
To use the mini SIM card: place mini SIM
card 2 in corresponding card slot 3. The
active side of the SIM card holder has the
contacts facing upwards.
or
#
To use the nano SIM card: place nano SIM
card 4 in corresponding card holder 5.
The active side of the SIM card holder has
the contacts facing upwards.
#
If required, confirm that mobile phones
already connected should be disconnected.
#
If required enter and confirm the SIM card
PIN.
#
To always use a SIM card: answer the SIM
card connected Do you want to use this SIM
card with only one specific device? query
with No.
Incoming and outgoing calls are available in
the vehicle's multimedia system using the
SIM card.
%
Every time the vehicle is started, the SIM
card is automatically connected and logged
into the radio cell.
%
In addition to the SIM card another mobile
phone can be connected in two phone mode
(/ page 374).
#
To use the SIM card only in combination
with a specific mobile phone: answer the
SIM card connected Do you want to use this
SIM card with only one specific device?
query with Yes.
#
Select a mobile phone that has been author‐
ised or connect a new mobile phone.
Incoming and outgoing calls are available in
the vehicle's multimedia system using the
SIM card.
%
The SIM card only logs into the radio cell
when the associated mobile phone is con‐
nected. The associated mobile phone can be
changed in the settings for the SIM card
(/ page 380).
Checking the status of the SIM card PIN
Multimedia system:
4
©
5
Phone
5
Z
5
Device manager
5
My devices
The symbol for car telephony appears with an
exclamation mark if re-entering the PIN is
required.
#
Select the name of the mobile phone or the
SIM card.
#
Enter the SIM card PIN and confirm.
MBUX multimedia system
379