Users Manual Part 3

R
The camera lens is obstructed, dirty or mis‐
ted up. Observe the notes on cleaning the
reversing camera (/ page 465).
R
The camera or rear of your vehicle is dam‐
aged. In this case, have the camera and its
position and setting checked at a qualified
specialist workshop.
%
Do not use the reversing camera in these
types of situation. You could otherwise injure
others or collide with objects when parking
the vehicle.
The field of vision and other functions of the
reversing camera may be restricted due to addi‐
tional accessories on the rear of the vehicle (e.g.
licence plate bracket or bicycle rack).
%
The contrast of the display may be impaired
by direct sunlight or by other light sources,
e.g. when driving out of a garage. In this
case, pay particular attention.
%
Have the display repaired or replaced if, for
example, pixel errors considerably restrict its
use.
360° Camera
Function of the 360° Camera
The 360° Camera is a system that consists of
four cameras. The cameras cover the immediate
vehicle surroundings. The system assists you,
e.g. when parking or at exits with reduced visibil‐
ity.
Observe the notes on driving systems and your
responsibility; you may otherwise fail to recog‐
nise dangers (/ page 203).
The system evaluates images from the following
cameras:
R
Reversing camera
R
Front camera
R
Two side cameras in the outside mirrors
Views of the 360° Camera
You can select from different views:
1
Wide-angle view, front
2
Top view with image from the front camera
3
Top view with images from the side cameras
in the outside mirrors
4
Wide-angle view, rear
5
Top view with image from the reversing cam‐
era
6
Top view with trailer view (vehicles with a
trailer hitch)
244
Driving and parking