Users Manual Part 3
Table Of Contents
- Climate control
- Overview of climate control systems
- Operating the climate control system
- Switching climate control on/off
- Switching climate control on/off via the rear operating unit
- Calling up the air conditioning menu
- Activating/deactivating the A/C function via the multimedia system
- Setting climate control to automatic mode
- Setting climate control to automatic mode via the rear operating unit
- Overview of the air distribution settings
- Setting the air distribution
- Setting the footwell temperature
- Setting climate control for the rear passenger compartment (multimedia system)
- Activating/deactivating the climate control synchronisation function via the multimedia system
- Demisting the windows
- Switching air-recirculation mode on/off
- Switching residual heat on/off
- Switching residual heat on/off via the rear operating unit
- Activating/deactivating ionisation
- Fragrance system
- Information on the windscreen heater
- Stationary heater/ventilation
- Air vents
- Driving and parking
- Driving
- DYNAMIC SELECT switch
- Automatic transmission
- Function of the 4MATIC
- Refuelling
- Parking
- Driving and driving safety systems
- Driving systems and your responsibility
- Information on vehicle sensors and cameras
- Overview of driving systems and driving safety systems
- Function of ABS
- Function of BAS
- Function of ESP®(Electronic Stability Program)
- Activating/deactivating ESP®(Electronic Stability Program)
- Function of ESP®Crosswind Assist
- Function of ESP®trailer stabilisation
- Function of EBD
- Function of STEER CONTROL
- Function of Active Brake Assist
- Setting Active Brake Assist
- Function of Adaptive Brake Lights
- Cruise control and limiter
- Active Distance Assist DISTRONIC
- Function of Active Speed Limit Assist
- Function of route-based speed adaptation
- Setting route-based speed adaptation
- Active Steering Assist
- Function of Active Lane Change Assist
- Activating/deactivating Active Lane Change Assist
- Function of Active Emergency Stop Assist
- Function of Active Traffic Jam Assist
- Activating/deactivating Active Traffic Jam Assist
- Function of Hill Start Assist
- HOLD function
- AIRMATIC
- E-ACTIVE BODY CONTROL
- Parking Assist PARKTRONIC
- Reversing camera
- 360° Camera
- Active Parking Assist
- ATTENTION ASSIST
- Traffic Sign Assist
- Traffic Light Assistant
- Blind Spot Assist and Active Blind Spot Assist with exit warning
- Active Lane Keeping Assist
- Trailer hitch
- Bicycle rack function
- Vehicle towing instructions
- Instrument Display and on-board computer
Activating/deactivating Active Traffic Jam
Assist
Multimedia system:
4
©
5
ß
5
Vehicle quick-access
#
Select Act. Stop&Go Asst.
Function of Hill Start Assist
Hill Start Assist holds the vehicle for a short
time when pulling away on a hill under the fol‐
lowing conditions:
R
The transmission is in position h or k.
R
The electric parking brake is released.
This gives you enough time to move your foot
from the brake pedal to the accelerator pedal
and depress it before the vehicle begins to roll
away.
&
WARNING Risk of accident and injury
due to the vehicle rolling away
After a short time, Hill Start Assist no longer
holds the vehicle.
#
Swiftly move your foot from the brake
pedal to the accelerator pedal. Do not
leave the vehicle when it is being held
by Hill Start Assist.
HOLD function
HOLD function
The HOLD function holds the vehicle at a stand‐
still without requiring you to depress the brake
pedal, e.g. while waiting in traffic.
The HOLD function is only an aid. The responsi‐
bility for the vehicle safely standing still remains
with the driver.
System limits
The HOLD function is only intended to provide
assistance when driving and is not a sufficient
means of safeguarding the vehicle against rolling
away when stationary.
R
The incline must not be greater than 30%.
Activating/deactivating the HOLD function
&
WARNING Risk of an accident due to the
HOLD function being activated when you
leave the vehicle
If the vehicle is only braked with the HOLD
function it could, in the following situations,
roll away:
R
If there is a malfunction in the system or
in the power supply.
R
If the HOLD function is deactivated by
depressing the accelerator pedal or brake
pedal, e.g. by a vehicle occupant.
#
Always secure the vehicle against roll‐
ing away before you leave it.
Requirements:
R
The vehicle is stationary.
R
The driver's door is closed or the seat belt on
the driver's side is fastened.
232
Driving and parking