Users Manual Part 3

Overview of the rear operating unit
1
Sets air distribution to the centre and side
air vents, left
2
Sets the temperature, left
3
Sets the airflow or switches climate control
on/off, left (/ page 162)
4
Switches climate control on/off
(/ page 161)
Switches residual heat on/off (/ page 164)
5
Sets the airflow or switches climate control
on/off, right (/ page 162)
6
Sets the temperature, right
7
Sets air distribution to the centre and side
air vents, right
8
Sets climate control to automatic mode,
right (/ page 162)
9
Sets the air distribution to the footwell vents,
right
A
Synchronisation is activated (/ page 163)
B
Sets the air distribution to the footwell vents,
left
C
Sets climate control to automatic mode, left
(/ page 162)
The settings for the second row of seats can be
configured via the rear operating unit, the multi‐
media system (/ page 163) or the MBUX rear
tablet depending on the vehicle's equipment.
Operating the climate control system
Switching climate control on/off
#
To switch on: set the airflow to level 1 or
higher via J on the climate bar on the
central display.
#
To switch off: set the airflow to level 0
via J on the climate bar on the central
display.
%
If climate control is switched off, the win‐
dows may mist up more quickly. Switch off
climate control only briefly.
Switching climate control on/off via the rear
operating unit
#
Press button 4.
or
#
Set the airflow to level 0 or higher using but‐
tons 3 and 5.
%
If the rear climate control is switched off via
button 4, OFF will be shown on the rear
display.
Climate control
161