Users Manual Part 3

Table Of Contents
AdBlue
®
displayed. Switch on the ignition
and wait for approximately 60 seconds. Start
the engine.
You can see the AdBlue
®
range and the level in
the driver's display.
%
The AdBlue
®
range shown depends strongly
on the driving style and operating condi‐
tions. The actual range can therefore deviate
from the calculated range.
Opening the AdBlue
®
filler cap
#
Press on the back area of fuel filler flap 1.
#
Turn AdBlue
®
filler cap 2 anti-clockwise and
remove it.
%
You can also store the AdBlue
®
filler cap in
the fuel filler cap holder in the fuel filler flap
hinge arm.
Topping up AdBlue
®
#
Screw on the fastener of AdBlue
®
refill canis‐
ter 2.
#
Screw disposable hose 1 onto the opening
of AdBlue
®
refill canister 2 until hand-tight.
#
Screw disposable hose 1 onto the filler
neck of the vehicle until hand-tight.
#
Lift up and tip AdBlue
®
refill canister 2.
The filling process stops when the AdBlue
®
tank is completely full.
AdBlue
®
refill canister 2 can be removed
when it has been only partially emptied.
Driving and parking
195