Users Manual Part 3

Table Of Contents
Configuring DYNAMIC SELECT (multimedia
system)
Multimedia system:
4
©
5
Settings
5
Vehicle
5
DYNAMIC SELECT (DYNAMIC SELECT)
Setting drive program I
#
Select Configure Individual.
#
Select and set a category.
Switching the reset display on/off
#
Switch Ask when starting on or off.
Function on: the next time the vehicle is started
a prompt appears asking whether the last active
drive program should be restored. If the ECO
start/stop function was deactivated, an addi‐
tional prompt appears asking if the function
should remain deactivated.
%
The prompt appears only if the previously
active settings deviate from the standard
settings.
Function off: the next time the vehicle is star‐
ted the A drive program is set automatically.
The ECO start/stop function is activated auto‐
matically.
Displaying vehicle data
Multimedia system:
4
©
5
Info
#
Select Vehicle.
The vehicle data is displayed.
Displaying engine data
Multimedia system:
4
©
5
Info
#
Select Engine data.
The engine data is displayed.
%
The actual (maximum) values that can be
achieved for engine output and engine tor‐
que may deviate from the certified values
within the country-specific guidelines for
permissible tolerances (basis: UN-ECE No.
85 or country-specific guidelines).
Factors that can influence this are, for exam‐
ple:
R
Sea level
R
Fuel grade
R
Outside temperature
R
Operating temperature of the engine
%
The values displayed serve only as orienta‐
tion. The values for engine output and
engine torque shown in the central display
may deviate from the actual values.
Calling up the fuel consumption indicator
Multimedia system:
4
©
5
Info
#
Select Consumption.
The current and average fuel consumption is
displayed.
Driving and parking
185