Users Manual Part 3

Table Of Contents
Folding the outside mirrors in/out
#
Briefly press button 3.
Resetting the outside mirrors
%
If the battery has been disconnected or com‐
pletely discharged, the outside mirrors must
be reset. Only then will the automatic mirror
folding function work properly.
#
Briefly press button 3.
Adjusting the outside mirrors
#
Select the required mirror using button 2 or
4.
%
In vehicles with MBUX Interior Assistant, the
required outside mirror can also be preselec‐
ted automatically via a natural head move‐
ment to the left or right (/ page 317).
#
Use button 1 to set the position of the mir‐
ror you have selected.
Engaging the outside mirrors
#
Press and hold button 3.
You will hear a click and the mirror will audi‐
bly click into place. The mirror will now be
set to the correct position.
Automatic anti-dazzle mirrors function
&
WARNING Risk of acid burns and poi‐
soning due to the anti-dazzle mirror elec‐
trolyte
Electrolyte may escape if the glass in an
automatic anti-dazzle mirror breaks.
The electrolyte is hazardous to health and
causes irritation. It must not come into con‐
tact with your skin, eyes, respiratory organs
or clothing or be swallowed.
#
If you come into contact with electro‐
lyte, observe the following:
R
Immediately rinse the electrolyte
from your skin with water and seek
medical attention.
R
If electrolyte comes into contact
with your eyes, immediately rinse
them thoroughly with clean water
and seek medical attention.
R
If the electrolyte is swallowed,
immediately rinse your mouth out
thoroughly. Do not induce vomiting.
Seek medical attention immediately.
R
Immediately change out of clothing
which has been contaminated with
electrolyte.
R
If an allergic reaction occurs, seek
medical attention immediately.
Light and sight
157