Users Manual Part 3
Table Of Contents
- Climate control
- Overview of climate control systems
- Operating the climate control system
- Switching climate control on/off
- Switching climate control on/off via the rear operating unit
- Calling up the air conditioning menu
- Activating/deactivating the A/C function via the multimedia system
- Setting climate control to automatic mode
- Setting climate control to automatic mode via the rear operating unit
- Overview of the air distribution settings
- Setting the air distribution
- Setting the footwell temperature
- Setting climate control for the rear passenger compartment (multimedia system)
- Activating/deactivating the climate control synchronisation function via the multimedia system
- Demisting the windows
- Switching air-recirculation mode on/off
- Switching residual heat on/off
- Switching residual heat on/off via the rear operating unit
- Activating/deactivating ionisation
- Fragrance system
- Information on the windscreen heater
- Stationary heater/ventilation
- Air vents
- Driving and parking
- Driving
- DYNAMIC SELECT switch
- Automatic transmission
- Function of the 4MATIC
- Refuelling
- Parking
- Driving and driving safety systems
- Driving systems and your responsibility
- Information on vehicle sensors and cameras
- Overview of driving systems and driving safety systems
- Function of ABS
- Function of BAS
- Function of ESP®(Electronic Stability Program)
- Activating/deactivating ESP®(Electronic Stability Program)
- Function of ESP®Crosswind Assist
- Function of ESP®trailer stabilisation
- Function of EBD
- Function of STEER CONTROL
- Function of Active Brake Assist
- Setting Active Brake Assist
- Function of Adaptive Brake Lights
- Cruise control and limiter
- Active Distance Assist DISTRONIC
- Function of Active Speed Limit Assist
- Function of route-based speed adaptation
- Setting route-based speed adaptation
- Active Steering Assist
- Function of Active Lane Change Assist
- Activating/deactivating Active Lane Change Assist
- Function of Active Emergency Stop Assist
- Function of Active Traffic Jam Assist
- Activating/deactivating Active Traffic Jam Assist
- Function of Hill Start Assist
- HOLD function
- AIRMATIC
- E-ACTIVE BODY CONTROL
- Parking Assist PARKTRONIC
- Reversing camera
- 360° Camera
- Active Parking Assist
- ATTENTION ASSIST
- Traffic Sign Assist
- Traffic Light Assistant
- Blind Spot Assist and Active Blind Spot Assist with exit warning
- Active Lane Keeping Assist
- Trailer hitch
- Bicycle rack function
- Vehicle towing instructions
- Instrument Display and on-board computer
feedback, e.g. when the end of a list is reached
or when you are scrolling through a list.
#
To call up a menu via the menu bar: press
home button 2.
#
Activate a menu by swiping to the left or
right on Touch Control 3.
#
Confirm by pressing Touch Control 3.
#
To switch between the menus: switch
directly from one menu to the next by swip‐
ing to the left or right.
#
To call up a submenu: press Touch Control
3.
#
To exit a submenu: press back button 1.
#
To scroll through displays or lists on the
menu or submenu: swipe upwards or down‐
wards on left-hand Touch Control 3.
%
Index points that show which menu you are
currently in or which menu content has been
selected appear at the bottom of the menu
bar or within a menu.
Setting display content as the standard dis‐
play
#
Press Touch Control 3.
On the Options submenu, the request Use
current display as standard display? will
appear.
#
Select Yes by swiping to the left and confirm
by pressing Touch Control 3.
#
To call up standard displays: press back
button 1 on the upper level of a menu.
%
Pressing back button 1 on the standard
display calls up the previous screen.
Resetting values on the on-board computer
You can reset the values of the following func‐
tions:
R
Trip meter
R
Trip computer From start and From reset
R
ECO display (/ page 182)
#
To call up a submenu: press Touch Control
3.
#
To select the function to be reset: swipe
on Touch Control 3.
#
Press Touch Control 3.
#
Select Yes.
#
Press Touch Control 3.
Selecting display content, centre on the
instrument cluster
On-board computer:
4
Classic
Depending on the vehicle equipment, you can
choose between different display content in the
276
Instrument Display and on-board computer