Users Manual Part 2
Table Of Contents
- Seats and stowing
- Notes on the correct driver's seat position
- Seats
- Adjusting the front seat electrically
- Adjusting the front passenger seat electrically from the driver's seat
- Adjusting the front passenger seat electrically from the rear
- Adjusting the rear seats electrically
- Setting the fully reclined position
- Head restraints
- Configuring the seat settings
- Setting automatic seat adjustment
- Setting automatic adjustment of the lateral support (active multicontour seat)
- Overview of massage programs
- Selecting the massage programme for the front seats
- Resetting seat settings
- Switching the seat heating on/off
- Setting the panel heating
- Switching the seat ventilation on/off
- Steering wheel
- Easy entry and exit feature
- Operating the memory function
- Memory function in the rear compartment
- Stowage areas
- Notes on loading the vehicle
- Stowage spaces in the vehicle interior
- Overview of the luggage net hooks
- Opening the through-loading feature in the rear compartment
- Locking the through-loading feature in the boot
- Using the bag hooks
- EASY-PACK boot box
- Opening the stowage space under the boot floor
- Attaching a roof luggage rack
- Cup holders
- Ashtray and cigarette lighter
- Sockets
- Coolbox
- Wireless charging of the mobile phone and connection with the exterior aerial
- Fitting and removing the floor mats
- Light and sight
- Exterior lighting
- Notes on adjusting the lights when driving abroad
- Information about lighting systems and your responsibility
- Light switch
- Operating the combination switch for the lights
- Activating/deactivating the hazard warning lights
- Adaptive functions MULTIBEAM LED and DIGITAL LIGHT
- Adaptive Highbeam Assist Plus
- Setting low beam
- Setting the exterior lighting switch-off delay time
- Switching the surround lighting on/off
- Interior lighting
- Windscreen wipers and windscreen washer system
- Exterior lighting
#
Hold the wiper arm with one hand. With the
other hand, turn the wiper blade in the direc‐
tion of arrow 1 away from the wiper arm as
far as it will go.
#
Slide catch 2 in the direction of arrow 3
until it engages in the removal position.
#
Remove the wiper blade from the wiper arm
in the direction of arrow 4.
Fitting the wiper blades
#
Insert the new wiper blade into the wiper
arm in the direction of arrow 1.
#
Slide catch 2 in the direction of arrow 3
until it engages in the locking position.
#
Make sure that the wiper blade is seated cor‐
rectly.
#
Fold the wiper arms back onto the wind‐
screen.
#
Switch on the ignition.
#
Press the î button on the combination
switch.
The wiper arms will move into the original
position.
#
Switch the ignition off.
154
Light and sight