Users Manual Part 2

Table Of Contents
#
Briefly press memory button M and then
press preset position button 1, 2 or 3 within
three seconds.
The settings for the front passenger seat and
the rear seat are stored in the selected pre‐
set position.
Calling up
#
Press button 1.
When the indicator lamp lights up, the front
passenger seat is selected.
Example: vehicles without a reclining rear seat
#
Press and briefly hold preset position button
1, 2 or 3.
%
The preset positions in the area for the
chauffeur mode can only be set when the
conditions for the chauffeur mode are fulfil‐
led .
%
Seat adjustment is interrupted as soon as
you release the preset position button.
The adjustment of the active multicontour
seat is still carried out.
%
You can use the rear-compartment child
safety lock to disable this function
(/ page 65).
Stowage areas
Notes on loading the vehicle
&
DANGER Risk of exhaust gas poisoning
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Exhaust
gases can enter the vehicle interior if the
boot lid is open when the engine is running,
especially if the vehicle is in motion.
#
Always switch off the engine before
opening the boot lid.
#
Never drive with the boot lid open.
Seats and stowing
119