Users Manual Part 2

Table Of Contents
You can save the following settings for the front
seat:
R
Seat, backrest, head restraint position and
contour of the seat backrest in the lumbar
region
R
Active multicontour seat
-
Side bolsters of the seat backrest
-
Shoulder of the seat backrest
-
Contour of the seat backrest
-
Dynamic function level
R
Seat heating: distribution of the heated sec‐
tions of the seat cushion and seat backrest
R
Driver's side: steering wheel position and
position of the outside mirrors on the driver's
and front passenger sides
R
Head-up display
#
Set the seat, the steering wheel, the head-up
display and the outside mirror to the desired
position.
#
Briefly press memory button M and then
press preset position button 1, 2 or 3 within
three seconds.
An acoustic signal sounds. The settings are
stored.
#
To call up: press and briefly hold preset posi‐
tion button 1, 2 or 3.
After releasing the button, the front seat,
outside mirror, head-up display and steering
column are moved into the stored position
automatically.
%
If you release the preset position button, the
seat, steering wheel and mirror setting func‐
tions stop immediately.
Vehicles with the Active Multicontour
Seat Package: setting the active multicon‐
tour seat or the 4-way lumbar support is still
carried out.
Vehicles without the Active Multicontour
Seat Package: adjustment of the 4-way lum‐
bar support is still carried out.
Seats and stowing
115