Users Manual Part 2

Table Of Contents
#
To fold back: press button 1.
#
Fold down the head restraint completely.
The centre head restraint has a usage and non-
usage position. The usage position is the upright
position in which the head restraint is locked;
the non-usage position is the position in which
the head restraint is folded downwards. When
the centre seat is used, the head restraint must
be in the upright, locked usage position.
Configuring the seat settings
Multimedia system:
4
©
5
Comfort
5
Seat comfort
Adjusting the air cushions.
#
In the corresponding menu, adjust the air
cushions for Lumbar, Shoulders or Side bol-
sters.
Setting the seat heating balance
#
Select Sitzklimatisierung (Seat climate con‐
trol).
#
Select Seat heating balance.
#
Adjust the heat distribution for the desired
seat.
Adjusting the neck warmer
#
Select Neck warmers.
#
Adjust the neck warmer for the desired seat.
Setting automatic seat adjustment
&
WARNING Risk of becoming trapped
during adjustment of the driver's seat
after calling up a driver profile
Selecting a profile may trigger an adjustment
of the driver's seat to the position saved
under the profile. You or other vehicle occu‐
pants could be injured in the process.
#
Make sure that when the position of
driver's seat is being adjusted using the
multimedia system, no people or body
parts are in the seat's range of move‐
ment.
If there is a risk of someone becoming trap‐
ped, stop the adjustment process immedi‐
ately:
#
a) Tap the warning message on the cen‐
tral display.
or
106
Seats and stowing