Users Manual Part 2

Table Of Contents
&
WARNING Risk of injury due to incor‐
rectly adjusted head restraints
If head restraints have not been adjusted
correctly, there is an increased risk of injury
in the head and neck area, e.g. in the event
of an accident or sudden braking.
#
Before driving off, make sure for every
vehicle occupant that the centre of the
head restraint supports the back of the
head at about eye level.
Adjust the head restraint fore-and-aft position so
that it is as close as possible to the back of your
head.
#
To move forwards: pull the head restraint
forwards.
#
To move backwards: press release knob 1
and push the head restraint backwards.
Attaching and removing the additional cush‐
ion of the front-seat luxury head restraint
#
Position head restraint 2 as far forwards as
possible.
#
To attach the additional cushion: open Vel‐
cro strip 4 on the rear of additional cushion
1.
#
Guide Velcro strip 4 between head restraint
2 and strip 3.
#
Close Velcro strip 4.
#
Change the position of the additional
cushion: move additional cushion 1 up or
down.
#
To remove additional cushion: open Velcro
strip 4 of additional cushion 1.
#
Remove additional cushion 1.
Seats and stowing
103