Users Manual Part 2

Table Of Contents
#
Adjust the seat properly before begin‐
ning your journey.
#
Always ensure that the backrest is in an
almost vertical position and that the
shoulder section of your seat belt is
routed across the centre of your shoul‐
der.
The switches for adjusting the seats do not
move. You will therefore receive no direct feed‐
back on the switch while pressing the switch.
Feedback is provided only by the movement of
the seat.
You can electrically adjust only the outer seats in
the rear compartment.
1
Height/fore-and-aft position of the head
restraint (vehicles with active multicontour
seat)
2
Head restraint height
3
Seat backrest inclination
4
Combined seat cushion inclination and
length
#
Save the settings with the memory function
(/ page 116).
Setting the fully reclined position
Requirements:
R
the power supply is switched on.
Seats and stowing
101