Users Manual Part 1
Table Of Contents
- Symbols
- At a glance
- Digital Owner's Manual
- General notes
- Protection of the environment
- Take-back of end-of-life vehicles
- Mercedes-Benz GenuineParts
- Owner's Manual
- Touch-sensitive controls
- Operating safety
- Declaration of Conformity
- Diagnostics connection
- Qualified specialist workshop
- Vehicle registration
- Correct use of the vehicle
- Information on the REACH regulation
- Notes for persons with electronic medical aids
- Implied warranty
- QR code for rescue card
- Data storage
- Copyright
- Occupant safety
- Restraint system
- Seat belts
- Protection provided by the seat belt
- Limitations of the protection provided by the seat belt
- Information on the belt airbag in the rear seat belt
- Extending/retracting the seat belt extender in the rear
- Fastening and adjusting seat belts
- Seat belt adjustment function
- Releasing a seat belt
- Activating/deactivating seat belt adjustment via the multimedia system
- Seat belt warning function for the driver and front passenger
- Function of the rear seat belt status display
- Airbags
- PRE-SAFE®system
- Automatic measures after an accident
- Safely transporting children in the vehicle
- Always observe when children are travelling in the vehicle
- Detecting risks, avoiding danger
- Overview of recommended child restraint systems
- Overview of suitable seats in the vehicle for fitting a child restraint system
- Approval categories for child restraint systems
- ISOFIX and i-Size child seat securing systems
- Securing a Top Tether
- Child safety locks
- Notes on pets in the vehicle
- Opening and closing
- Key
- Doors
- Notes on the additional door lock
- Unlocking/opening the doors from the inside
- Centrally locking and unlocking the vehicle from the inside
- Locking/unlocking the vehicle with a Digital Vehicle Key
- Locking/unlocking the vehicle with KEYLESS-GO
- Problems with KEYLESS-GO
- Activating/deactivating the automatic locking feature
- Power closing function
- Locking/unlocking the vehicle with the emergency key
- Boot
A) ISO 4063, EN ISO 14341-A, DBL 7382.20,
MBN 10435, AS 2693
B) ISO 4063, ISO 14341-A, DBL 7392.10, MBN
10435
C) DBL 7392.10, DBL 8230.10
The technical documentation of the product is
stored at the manufacturer's plant. Representa‐
tive for the compilation of the technical docu‐
mentation: Director of the Technical Department
Brano a.s.
4.
Hradec nad Moravicí
City
5.
05.05.2015
Date
Signed by
Director of Quality
TIREFIT kit
Copy and translation of the original declaration
of conformity:
EC declaration of conformity
In accordance with EC Directive 2006/42/EC
We hereby declare that the product
Product designation: Daimler electric air pump
Model designation: 0851ve, DT/UW 200046
MB part no.: A 000 583 8200
complies with the following relevant regulations:
2004/108/EC
Applied harmonised standards, in particular:
DIN EN 55014-1
DIN EN 55014-2:2009-06
Manufacturer: Dunlop Tech GmbH
Address: Birkenhainerstrasse 77, 63450 Hanau
Authorised representative: IMS dept.
Date: June 2015
Signature: IMS-AM, IMS-AE-L
Diagnostics connection
The diagnostics connection is only intended for
the connection of diagnostic devices at a quali‐
fied specialist workshop.
&
WARNING Risk of accident due to con‐
necting devices to the diagnostics con‐
nection
If you connect devices to the diagnostics
connection of the vehicle, the function of
vehicle systems and operating safety may be
impaired.
#
Only connect the vehicle diagnostics
connection to devices which have been
tested with regard to their suitability
and are considered safe.
&
WARNING Risk of accident due to
objects in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardises the operating and road
safety of the vehicle.
General notes
29