User's Guide

Figure 109. Adjusting CB Volume

Intercom (if equipped)

On select models, the Intercom functionality allows Rider and Passenger voice communication through

their respective headsets/microphones.

NOTE

Some local governments prohibit or restrict the use of headset (helmet-mounted) speakers. Check with

local authorities and obey all applicable laws and regulations.

With the headsets/microphones plugged into the rider and/or passenger intercom sockets, the

Intercom is voice activated (VOX).

If the Intercom is OFF, press the upper-left corner button labeled Off, so that it reads On. This button

toggles the Intercom between the ON and OFF state.

Figure 110. Turning Intercom On

Adjusting VOX sensitivity

VOX sensitivity should be adjusted so that the microphones break VOX at a normal voice level. The

Intercom icon in the status bar should be helpful for performing the adjustment (See Table 6, for

description of status bar icons). In the Intercom screen, press on the – or + buttons to adjust the VOX

sensitivity level.