User's Guide

73
Once activated, the CB will retain the squelch threshold and channel settings from previous use.
Channels are selected by use of the Left handlebar controls Seek Down and Seek Up buttons. Favorite
CB channels can be saved as Presets.
It is possible to change the Mode to other audio sources (AM, FM, Media), leaving the CB active.
The CB signal is passed to the speakers or headsets, depending on Speaker/Headset selection, from
the Setup Menu.
Adjusting Squelch
The squelch threshold can be adjusted using the SQ+ and SQ- buttons from the Right handlebar
controls. A scale of the CB squelch will be visible during the adjustment.
Figure 108. Adjusting CB Squelch
Only when the CB signal strength exceeds the threshold set, received signal will be passed to the
speakers or headsets.
CB Transmitting
To transmit, press and hold the PTT button in the Right handlebar controls, or in the Passenger
controls (if equipped). To end transmission, release the PTT button.
Adjusting CB Volume
To adjust volume of the CB in speakers or headsets, press Volume Up or Volume Down in the Left
handlebar controls, when the CB screen is visible. A scale of the CB volume will be visible during the
adjustment.