User's Guide

Communication

There are three possible devices for communications: Citizen Band radio (if equipped), Intercom (if

equipped) and Phone connected through Bluetooth

NOTE

The Intercom and CB can be activated at the same time with the receiver modes. The Intercom and CB

signals are passed to the audio circuits only if the signal strength exceeds the threshold established by

CB squelch or VOX microphone sensitivity levels.

To select Communication devices,

• Go to: Home screen -> Com

• Select the communication device, if available.

Figure 106. Communication Screen

Citizen Band (CB) radio (if equipped)

If the CB is OFF, press the upper-left corner button labeled Off, so that it reads On. This button toggles

the CB between the ON and OFF state.

Figure 107. Turning CB On