Operation Manual

om01977

1. Fade adjustment line

2. Equal balance point (default)

Figure 36. Graphical Fade Adjustment: Select Models

SPEED VOLUME

The speed volume setting adjusts the volume according to

vehicle speed. This function allows the volume to be set to a

comfortable level while the motorcycle is stopped or traveling

slowly.The volume automatically increases to compensate for

engine, wind and other ambient noise factors as vehicle speed

increases.

The speed volume setting also affects the voice activation

(VOX) of the intercom. This prevents ambient noise from

activating VOX transmissions when at greater speeds. It also

prevents the need to continually adjust the VOX sensitivity

setting.

Speed volume is also known as automatic volume control

(AVC) on previous Harley-Davidson sound systems.

1. Select Home > Setup > Audio Setup.

2. See Figure 35. Select Fade/Speed Volume.

3. Adjust speed volume to one of four different levels. Each

level defines the amount of gain that is added to the

volume as vehicle speed increases.

NOTES

• Setting speed volume to the lowest level effectively turns

off this feature.The volume remains constant while riding.

However, the radio has equalizers with dynamic filters

which modify certain frequency bands depending on

speed. So there may still be a change in sound as the

speed changes, even with speed volume turned off.

• The effects of the speed volume will be less noticeable

under certain conditions, such as when the volume is

already turned up near its maximum setting.

System Settings 53