Operation Manual

om01674
Figure 33. Speaker/Headset Selection
AUDIO SETTINGS: BASS/TREBLE
1. See Figure 34. Select Home > Setup > Audio Setup.
2. Adjust the Bass and Treble settings using the + and -
controls.The tone settings are applied for all audio output
through the speakers and headsets.
om01675
Figure 34. Audio Setup Screen
FADE
The fade setting adjusts the balance of volume between the
front and rear speakers. By default, the fade is set at the center
with an equal balance of volume. Some vehicles have a fade
adjuster as shown in Figure 35. Other vehicles have a graphical
fade adjuster as shown in Figure 36.
The fade setting does not affect headset or microphone audio
levels. Fade does not apply to models without rear speakers.
1. Select Home > Setup > Audio Setup.
2. Select Fade/Speed Volume.
System Settings 51