Operation Manual

2. Press the multiselect button until the desired unit type is
displayed.
a. English Units: Measurements are displayed as miles,
yards, feet, mph, gallons, degrees F and PSI.
b. Metric: Measurements are displayed as kilometers,
meters, km/h, liters, degrees C and bar.
CLOCK
1. See Figure 31. Select Home > Setup > Clock.
2. 12/24 hour: Select 12-Hour or 24-Hour clock mode.
3. Press the multiselect button to choose GPS, RDS or User
Time.
a. GPS: Automatically synchronizes the clock with data
from incoming GPS signals. GPS time is only avail-
able on radios with navigation.
b. RDS: Automatically synchronizes time with radio
stations broadcasting RDS data. RDS is only available
on radios manufactured for select regions that support
RDS operation.
c. User Time: Time is manually entered.
4. Time zone: Select the time zone. For GPS time, AUTO
causes the clock to adjust to the time zone for the vehicle
location.The clock updates as the motorcycle passes into
other time zones.
5. Daylight savings time (DST): GPS time does not auto-
matically account for daylight savings time. For GPS or
user time, select DST On to advance the clock one hour
(during spring in the northern hemisphere). Select DST
Off to return to the original time.
6. Manually adjusting time:
a. Manually adjusting time (User Time selected):
Manually adjust the clock to the current time with the
+ and - controls.
b. Manually adjusting time (GPS Time selected): An
offset can be applied to the GPS time. The offset is
shown next to the time setting.
System Settings 49