Operation Manual

No valid input: If the system does not recognize a voice
command, a response to a prompt, or if an extended period of
time elapses before a command is spoken, the session auto-
matically cancels.
TELEPROMPTER
See Figure 135. The teleprompter is shown when the VOICE
RECOGNITION switch is pressed. The teleprompter screen
shows commonly used commands, along with a line item to
display more commands.
The CURSOR/SELECT switch can be used to select a com-
mand. Speaking or selecting MORE COMMANDS displays a
list of all commands.
om02016
Figure 135.Teleprompter (Typical)
COMMAND LIST
See Figure 136. If a command is not spoken or recognized
while the teleprompter is displayed, the system shows a list of
command categories. Speak one of the categories into the
microphone, or use the CURSOR/SELECT switch to show all
commands related to a selected category.
om02075
Figure 136. Command List (typical)
184 Voice Recognition