Operation Manual

TURNING TRAFFIC ON/OFF
On equipped vehicles, traffic automatically turns on when
selecting the RDS traffic feature from the Home screen or when
selecting the SiriusXM traffic feature.
1. Select Home > Setup > Traffic.
2. Check the Traffic checkbox to turn on.
TRAFFIC NOTIFICATION SETTINGS
1. Select Home > Setup > Traffic > Notification.
2. Beep when traffic popup is displayed: Check Popup
Beep checkbox.
3. Traffic event range: Select Message Filter. Choose the
maximum distance of traffic events to be displayed in the
event list.
REROUTING
The system can be configured to manually or automatically
select a new route based on traffic data. The system will only
provide a new route when it is calculated to be at least five
minutes faster than the current route.
1. Select Home > Setup > Traffic.
2. Choose the rerouting setting.
a. Automatic: The system will automatically adjust the
route according to traffic data.
b. Manual: The system will provide a popup when a
new route is suggested. The rider can choose to
accept or reject the recalculated route.
c. Off: The system will not prompt with any new routes
based on traffic data.
TRAFFIC EVENT LIST: RDS TRAFFIC
NOTE
For SiriusXM traffic, see SIRIUSXM, SiriusXM Traffic.
1. See Figure 133. Select Home > Traffic. If a route is active,
the system displays traffic events along the route. If a route
is not active, the system displays all nearby traffic events.
2. Select an item from the list. The traffic message is dis-
played. The text to speech feature reads the message
over the speakers or headset.
3. Select the map button to display the event location on the
map.
Navigation 177