Operation Manual

4. Select Yes to confirm.
EXPORTING A ROUTE
A trip, trail or saved destination can be exported to a USB
storage device.The system exports the set of routes as a GPX
file named "H-D_NavData.gpx". If needed, the system adds a
sequential number to prevent overwriting other previously saved
files (such as "H-D_NavData(1).gpx"). Multiple trips or destin-
ations can be contained in a single GPX file.
The export feature is designed to back up routes or share
routes with other riders that have a Boom! Box system. While
the GPX file may be imported into other GPS devices, there
may be limitations on compatibility.
1. While stopped, connect a USB device to store the files.
The USB device must be formatted to FAT16 or FAT32
(typical format used by PCs) to support data exports.
NTFS-formatted devices are read-only and do not support
GPX export.
2. From the Navigation menu, select Menu.
3. Select Export. A list of trips, trails and saved destinations
are displayed.
4. Check the checkboxes for all items to be exported, or
choose Select All.
5. Select the USB Export button on the right side of the
screen.
6. Select OK when the export completes. The USB device
can be removed.
IMPORTING A ROUTE
The system can import trip, trail and destination files saved in
GPS Exchange Format (GPX). The files may have been
exported by another motorcycle equipped with a Boom! Box
or created by Ride Planner (www.h-d.com/rideplanner). A single
GPX file may contain multiple trips and destinations.
The system can use GPX files exported by other GPS devices
or mapping websites. While GPX is a standard format for
navigation files, there may be some limited compatibility when
importing these routes. Review the route before riding.
Imported routes are stored in respective locations within the
radio. Destinations are stored in the Saved list. Imported trips
are stored in the Trips list. Imported phone book contact files
(V-card files, VCF) are added to the Book list in the navigation
menu.
1. While stopped, connect a USB device to store the files.
2. From the Navigation menu, select Menu.
3. Select Import. A list of GPX and VCF files are displayed.
Navigation 165