Operation Manual

EDITING A TRIP: SKIPPING NEXT
WAYPOINT
1. With active route on the map, select the option button.
2. Select Skip Next Waypoint.
3. Select Yes.
EDITING A TRIP: SKIPPING WAYPOINTS
FROM LIST
1. With active route on the map, select the option button.
2. Select Destinations.
3. Select the destination to skip.
4. Select the options button.
5. Select Stop. The system removes the waypoint from the
current route. However, the waypoint is not removed from
the originally stored trip.
TRAILS
See Figure 121. A trail is a specific path which is recorded
during your ride.While the trail is recording, the system stores
ongoing location points along the ride. This is different than
saving a destination or trip, which only store a number of loca-
tions rather than a specified path.
A trail can be used to repeat the ride along the same path in
the future or to route back to the start of the trail using the same
path.
A trail can be recorded at any time. A route does not need to
be active to begin recording a trail.
om02050
Figure 121. Recording a Trail
RECORD A TRAIL: OPTIONS MENU
1. With the map displayed, select the option button.
Navigation 163