Operation Manual

2. Select Trip.
3. Enter a name for the trip. Use a name that is easy to pro-
nounce when using voice recognition features. Select OK.
4. Enter a destination (address, POI, recent destination,
saved location or intersection).
5. Select Add. When prompted to add more destinations,
select Yes to add more destinations or select No when
finished.
6. The trip itinerary is displayed.
7. To start the trip: Select Start.
To edit the trip: Select the edit button (pencil icon). See
NAVIGATION, Editing a Trip: Adding Waypoints in Menu.
CREATING A TRIP: USING MAP
1. With map displayed, press the touchscreen.
2. Scroll to a POI or location on the map. Select the center
circle to calculate a route to the destination. Select Go.
3. Repeat the previous step to add more destinations to the
route. Up to nine destinations can be added to a trip.
4. After all destinations have been chosen, select the option
button on the map.
5. Select Destinations. Select the edit button (pencil) to
reorder the waypoints as needed.
6. Select Save As Trip.
7. Enter a name for the trip. Select OK.
ROUND TRIP
When the round trip function is enabled, the system calculates
a return route to the original position of the vehicle.The round
trip feature can only be enabled before a route is activated.
1. With no route active, access the route calculation settings.
a. From setup menu: Select Home > Navigation Setup
> Route Calculation.
b. During route calculation: Select option button.
Select Route Calculation.
2. Check the Round Trip checkbox. When a new route is
created, the map will include a return route back to the
original location of the vehicle.
EDITING A TRIP: ADDING WAYPOINTS IN
MENU
1. With a trip selected, press the edit button (pencil).
Navigation 161