Operation Manual

ADJUSTING MICROPHONE SENSITIVITY:
VOX
VOX sensitivity should be adjusted so the microphones break
VOX at normal voice volume. The sensitivity level applies to
both the rider and passenger microphones.
Adjust the sensitivity as needed if the microphone breaks VOX
from unintended sounds, such as road or background noise.
1. Select Home > Com > Intercom.
2. While speaking into the microphone, use the controls (+
and -) to adjust the sensitivity until your normal voice
volume breaks VOX. The intercom icon in the status bar
should be white (active) when speaking at a normal tone.
a. Raise sensitivity: Move the level to the right. The
microphone becomes more sensitive. The intercom
will activate (break VOX) with quieter sounds through
the microphone.
b. Reduce sensitivity: Move the level to the left. The
intercom will only activate (break VOX) with louder
voice or sounds.
c. Fully open microphone: Raising the sensitivity to
the maximum level will keep the intercom microphone
open continually.
d. PTT only: Reducing the sensitivity to the minimum
level will prevent any VOX operation. The intercom
can only be activated with the PTT switch.
SPEED VOLUME
Speed volume is applied to the intercom to compensate for
engine noise, wind and road input. As the motorcycle speed
increases, the sensitivity of the microphones will automatically
decrease.This prevents road noise from breaking VOX. It also
prevents unnecessary adjustments to the microphone sensitivity
while riding.
Intercom 119