Operation Manual

Initiating CB transmission (passenger): When channel is
clear, press and hold the passenger PTT switch on side of
Tour-Pak. Both the rider and passenger microphones become
active. Release PTT switch when finished.
Adjusting CB volume (passenger): While on CB screen (or
while CB is in operation), use UP/DN switch on side of Tour-
Pak to adjust passenger headset volume. The volume switch
does not affect the speakers or rider headset volume.
FACTORS AFFECTING CB RANGE
Adverse weather, buildings, hills and valleys can affect the
maximum range for the CB radio. Degraded reception or
transmission capability can also occur in tunnels or parking
garages.The CB transmitter is the most powerful allowed under
US federal law. However, since there is no large steel area to
create a ground plane, the CB may not transmit as strongly as
CBs mounted in a car or truck.
ADDING AN OPTIONAL CB MODULE
Bike-to-bike (CB) communication is standard on some vehicles
in select locations. For vehicles not equipped with a CB, the
optional CB accessories can be purchased at www.h-
d.com/store or at an authorized Harley-Davidson dealer.
Installation of the CB module may only be allowed in particular
regions. See www.h-d.com/store or your authorized Harley-
Davidson dealer for fitment and requirements. Follow the
instruction sheet procedures or have an authorized Harley-
Davidson dealer install the accessory. For set up and operation,
use the instructions in this manual.
Citizen Band (CB) Radio 115