Operation Manual

4. Select OK. A sample of the ring tone is played.The system
will use the selected ring tone for all incoming calls.
om02065
Figure 79. Selecting Ring Tone
ADDING NEW RING TONE: MEDIA FILE
CURRENTLY PLAYING
1. With media file playing, select Menu button in upper right
corner of the media player.
2. Select Ring Tones. The radio stores the current file as a
ring tone. The radio will prompt if the file is too large or
when replacing an existing ring tone.
3. Select OK. The ring tone is stored in the radio and con-
figured as the current ring tone.
ADDING NEW RING TONE: BLUETOOTH
SETUP
1. With motorcycle stopped, connect device (with ring tone
file) to USB port.
2. Select Home > Setup > Bluetooth Setup. (Bluetooth
Setup can also be selected in the phone menu.)
3. Select Ring Tones > Load Ring Tones.
4. Select device.
5. Find and select the file. The radio will prompt if the file is
too large or when replacing an existing ring tone.
6. Select OK. The file is stored in the radio and configured
as the current ring tone.
RESUMING CALLS AFTER VEHICLE
SHUTDOWN
If a call is active while the motorcycle is being turned off, the
radio will request to transfer the call back to the phone as
shown in Figure 80.
Phone 105