Operation Manual

ENABLING BLUETOOTH
Bluetooth must be enabled before pairing or connecting with
Bluetooth devices.
1. Select Home > Setup > Bluetooth Setup.
2. See Figure 63. Check the Bluetooth checkbox to enable.
om01716
Figure 63. Bluetooth Setup Menu
PAIRING A BLUETOOTH DEVICE
A maximum of six devices can be paired with the radio at one
time. However, the radio only maintains an active Bluetooth
connection with up to one device for phone service and one
device for media at a time.
The motorcycle identifies itself as "H-D Radio". The name for
the Bluetooth device is specified within the settings for your
device.
NOTE
Phones may request permission to share information with "H-
D Radio" (such as phone book contacts and text messages).
These requests may occur during the pairing process or on
other occasions when the phone is connecting with the radio.
1. In the Bluetooth-compatible device, enable Bluetooth and
set the device as discoverable. See the manual for your
device.
2. In the radio, select Home > Setup > Bluetooth Setup.
3. See Figure 64. Select List Paired Devices > Add a New
Device. All discoverable devices within range appear in
the list of found devices.
4. Select the device to be paired from the list.
5. The device displays a PIN code and prompt for permission
to pair with "H-D Radio". Allow the pairing within the
device.
6. See Figure 65. In the radio, select Yes.The radio attempts
to pair and connect with the device.
7. The system prompts for an emergency phone number if
one is not already stored in the system. Enter a phone
87
BLUETOOTH