User Manual
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Scope of delivery
- 3 Assembly instructions
- 3.1 Cutting out headstock
- 3.2 Painting body and neck
- 3.3 Mounting the machine head
- 3.4 Mounting the string retainers
- 3.5 Mounting the guitar neck
- 3.6 Wiring the potentiometers, pickups and switches
- 3.7 Mounting the pickguard, output jack and potentiometer plate
- 3.8 Mounting the strap buttons
- 3.9 Strings, neck relief, string height and pickups
- 4 Protecting the environment
3.9 Strings, neck relief, string height and pickups
The strings are threaded from the bridge towards the neck over the corresponding
saddle. Wrap the string end around the tuner several times and pull each string
hand-tight at rst. Be sure that each string is in the correct position on the saddle and
in the correct string retainer.
Then tune each string in turn to the correct pitch. You can using a tuner or a pitch
pipe as a reference. Please note that the string tension will still drift and the guitar
will need to be retuned a few times before the strings are played in.
Stringing
Assembly instructions
Electric Guitar Kit T-Style, TE-LH
19
Electric Guitar Kit