User Manual
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Scope of delivery
- 3 Assembly instructions
- 3.1 Cutting out headstock
- 3.2 Painting body and neck
- 3.3 Mounting the machine head
- 3.4 Mounting the string retainers
- 3.5 Mounting the guitar neck
- 3.6 Wiring the potentiometers, pickups and switches
- 3.7 Mounting the pickguard, output jack and potentiometer plate
- 3.8 Mounting the strap buttons
- 3.9 Strings, neck relief, string height and pickups
- 4 Protecting the environment
Set the holder for the output jack in place and check whether the jack protrudes. It
should stick out over the holder enough that it can be screwed rmly in place with
the nut provided, but no further than necessary. Correct the position if necessary by
turning the counter nut inside appropriately.
Then screw the output jack holder onto the body.
Screw the potentiometer plate onto the body using the screws provided.
Assembly instructions
Electric Guitar Kit T-Style, TE-LH
17
Electric Guitar Kit