User Manual
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Scope of delivery
- 3 Assembly instructions
- 3.1 Cutting out headstock
- 3.2 Painting body and neck
- 3.3 Mounting the machine head
- 3.4 Mounting the string retainers
- 3.5 Mounting the guitar neck
- 3.6 Wiring the potentiometers, pickups and switches
- 3.7 Mounting the pickguard, output jack and potentiometer plate
- 3.8 Mounting the strap buttons
- 3.9 Strings, neck relief, string height and pickups
- 4 Protecting the environment
Place the body on a suitable working surface. Use a soft pad in order to avoid
damage to the surface. Insert the bridge with the pickup into the cutout on the body
as illustrated.
Ensure the pickup sits in the centre of the hole and is aligned with the pre-drilled
screw holes. Attach the bridge using the supplied screws. If necessary, adjust the
position of the earthing wire so that the bridge can be mounted at on the guitar
body using the fastening screws.
Assembly instructions
14
Electric Guitar Kit T-Style, TE-LH
Electric Guitar Kit