User Manual
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Scope of delivery
- 3 Assembly instructions
- 3.1 Cutting out headstock
- 3.2 Painting body and neck
- 3.3 Mounting the machine head
- 3.4 Mounting the string retainers
- 3.5 Mounting the guitar neck
- 3.6 Wiring the potentiometers, pickups and switches
- 3.7 Mounting the pickguard, output jack and potentiometer plate
- 3.8 Mounting the strap buttons
- 3.9 Strings, neck relief, string height and pickups
- 4 Protecting the environment
Turn the guitar over and position the neck plate over the four bolt holes at the rear of
the body, then screw the four wood screws provided through the neck plate, body
and pilot holes in the neck until everything ts tightly.
Assembly instructions
Electric Guitar Kit T-Style, TE-LH
11
Electric Guitar Kit