User Manual
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Scope of delivery
- 3 Assembly instructions
- 3.1 Cutting out headstock
- 3.2 Painting body and neck
- 3.3 Mounting the machine head
- 3.4 Mounting the string retainers
- 3.5 Mounting the guitar neck
- 3.6 Wiring the potentiometers, pickups and switches
- 3.7 Mounting the pickguard, output jack and potentiometer plate
- 3.8 Mounting the strap buttons
- 3.9 Strings, neck relief, string height and pickups
- 4 Protecting the environment
3.4 Mounting the string retainers
Screw the two string retainers to the front of the head plate in the holes provided
next to the tuners. The string retainer with the thicker spacer must be inserted into
the hole that is closer to the saddle.
Ensure the string retainers can still move freely. They will be secured by the tension
of the strings.
3.5 Mounting the guitar neck
Place the body on a suitable work surface. Use a soft pad in order to avoid damage to
the surface. Insert the neck into the neck cutout. If necessary, use a sharp chisel or
sandpaper to adjust it. Be very careful when removing material. The neck should be
tight and never have too much clearance in the cutout!
Assembly instructions
10
Electric Guitar Kit T-Style, TE-LH
Electric Guitar Kit