Quick start guide

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de DocID: 521980_08.03.2022
Tag Team
Quick Start Guide
This quick start guide contains important information on the safe operation of the
product. Read and follow the safety advice and instructions given. Retain the quick
start guide for future reference. If you pass the product on to others please include
this quick start guide.
For the transport and protective packaging, environmentally friendly materials have been
chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are
properly disposed of. Do not just dispose of these materials with your normal household
waste, but make sure that they are collected for recycling. Please follow the notes and mark-
ings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equipment Directive
(WEEE) in its currently valid version. Do not dispose of your old device with your normal house-
hold waste. Dispose of this product through an approved waste disposal rm or through your
local waste facility. Comply with the rules and regulations that apply in your country. If in doubt,
consult your local waste disposal facility.
EN
Technical specications
Input connections 1/4" jack socket
Socket for connecting a power adapter
Output connections 1/4" jack socket
Power supply External power adapter, 100 - 240 V ~ 50/60 Hz
Power adapter Secondary current 100 mA
Secondary voltage 9 V
Polarity Centre negative
Degree of protection IP20
Dimensions (W × H × D) 95 mm × 37 mm × 120 mm
Weight 322 g
Ambient conditions Temperature range 0°C...40°C
Relative humidity 20%...80%
(non-condensing)
Features
Dual eect pedal for electric guitars
Foot switches with LED indicators
The eect modules A and B can be used simultaneously or individually and in any
order
Adaption of the original japanese green Overdrive circuit with smooth gain and
pronounced mid-hump characteristic (eect module A)
Overdrive with classic british blues tone (eect module B)
3-way switch for eects order
Power supply via 9 V
power adapter (not included,
suitable optional power adapter: item no. 409939, no battery operation)
Operating elements
1 9V Socket for connecting a power adapter (not included)
2 LEVEL Rotary control for adjusting the volume level of the Overdrive
eect
3 Hot/Warm Switch for selecting the tone mode of the Overdrive eect
Hot: aggressive and powerful crunch tone
Warm: classic tube amplier with a smooth, natural tone
4 TONE Rotary control for adjusting the tone colour of the Overdrive eect
5 DRIVE Rotary control for adjusting the gain level of the Overdrive eect
6 INPUT 1/4" jack socket for connecting instruments
7 Overdrive Foot switch for switching on/o the Overdrive eect
8 Blues drive Foot switch for switching on/o the Blues drive eect
9 OUTPUT 1/4" jack socket for connecting an amplier
10 GAIN Rotary control for adjusting the gain level of the Blues drive eect
11 Switch for selecting the operation mode
A – B The Overdrive and Blues drive eects can simultaneously be
enabled. The signal will go through the Overdrive eect and then
to the Blues drive eect.
A or B Either the Overdrive eect or the Blues drive eect can be
enabled.
B – A The Blues drive and Overdrive eects can simultaneously be
enabled. The signal will go through the Blues drive eect and then
to the Overdrive eect.
12 LEVEL Rotary control for adjusting the volume level of the Blues drive
eect
13 TONE Rotary control for adjusting the tone colour of the Blues drive
eect
Blues drive
B
Overdrive
A
GAIN DRIVE
LEVEL TONE LEVEL TONE
TAG TEAM
BY
HotWarm
A – B
B – A
A or B
. #ö
%
'
&
(
*
+
-
,
)
$
Safety instructions
Intended use
This device is intended for use as eect pedal for electric guitars. Any other use or use
under other operating conditions is considered to be improper and may result in per-
sonal injury or property damage. No liability will be assumed for damages resulting
from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure
that children do not detach any small parts from the product. They could
swallow the pieces and choke!
Where to use the product
Never use the product
in conditions of extreme temperature or humidity
in extremely dusty or dirty areas
at locations where the unit can become wet
General handling
To prevent damage, never use force when handling the product.
Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use
liquid cleaners such as benzene, thinners or ammable cleaning agents.

Summary of content (1 pages)