User manual
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Scope of delivery
- 3 Assembly instructions
- 3.1 Painting the body and neck
- 3.2 Mounting the tuners
- 3.3 Mounting the neck of the guitar
- 3.4 Wiring the potentiometers, pickups and switch
- 3.5 Mounting the pickguard
- 3.6 Mounting the tailpiece and bridge
- 3.7 Mounting the potentiometer knobs and strap buttons
- 3.8 Strings, neck relief and the position of the strings
- 4 Protecting the environment
3.3 Mounting the neck of the guitar
Place the body on a suitable working surface. Use a soft pad in order to avoid
damage to the surface. Insert the neck into the neck cutout. If necessary, use a sharp
chisel or sandpaper to adjust it. Be very careful when removing material. The neck
should be rmly seated and under no circumstances should there be too much play
in the cutout!
Assembly instructions
Electric Guitar Kit Single Cut
9