User manual
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Scope of delivery
- 3 Assembly instructions
- 3.1 Painting the body and neck
- 3.2 Mounting the tuners
- 3.3 Mounting the neck of the guitar
- 3.4 Wiring the potentiometers, pickups and switch
- 3.5 Mounting the pickguard
- 3.6 Mounting the tailpiece and bridge
- 3.7 Mounting the potentiometer knobs and strap buttons
- 3.8 Strings, neck relief and the position of the strings
- 4 Protecting the environment
Screw the cover for the truss bar onto the header headstock.
Once the neck has the desired relief, you can use the screws to the right and left of
the bridge to adjust the string position to suit your taste. Here, too, the lower the
strings, the easier they are to fret, but they will buzz more easily when the guitar is
played.
Adjusting the position of the strings
Assembly instructions
electric guitar kit
26