User manual
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Scope of delivery
- 3 Assembly instructions
- 3.1 Painting the body and neck
- 3.2 Mounting the tuners
- 3.3 Mounting the neck of the guitar
- 3.4 Wiring the potentiometers, pickups and switch
- 3.5 Mounting the pickguard
- 3.6 Mounting the tailpiece and bridge
- 3.7 Mounting the potentiometer knobs and strap buttons
- 3.8 Strings, neck relief and the position of the strings
- 4 Protecting the environment
3.6 Mounting the tailpiece and bridge
Use a rubber mallet to drive the bolt fasteners for the tailpiece and bridge into the
body as shown. Be sure there is suîš„cient contact between the stripped end of the
earthing wire and the bolt for the tailpiece.
Assembly instructions
Electric Guitar Kit Single Cut
21